Publicaciones en las que colabora con María Teresa Montañés Sanjuán (27)

2023

  1. Effluents from the copper electrorefining as a secondary source of antimony: Role of mass transfer on the recovery by electrodeposition

    Desalination, Vol. 549

  2. Voltammetric and electrodeposition study for the recovery of antimony from effluents generated in the copper electrorefining process

    Journal of Environmental Chemical Engineering, Vol. 11, Núm. 1

2022

  1. Enhanced Atenolol oxidation by ferrites photoanodes grown on ceramic SnO2-Sb2O3 anodes

    Journal of Alloys and Compounds, Vol. 908

  2. Study of the chlorfenvinphos pesticide removal under different anodic materials and different reactor configuration

    Chemosphere, Vol. 290

2020

  1. Influence of the reactor configuration and the supporting electrolyte concentration on the electrochemical oxidation of Atenolol using BDD and SnO2 ceramic electrodes

    Separation and Purification Technology, Vol. 241

2016

  1. ZnO/ZnS heterostructures for hydrogen production by photoelectrochemical water splitting

    RSC Advances, Vol. 6, Núm. 36, pp. 30425-30435

2014

  1. The effectiveness of the stabilization/solidification process on the leachability and toxicity of the tannery sludge chromium

    Journal of Environmental Management, Vol. 143, pp. 71-79

2013

  1. Contribution of the flowing conditions to the galvanic corrosion of the copper/AISI 316L coupling in highly concentrated LiBr solutions

    Corrosion Science, Vol. 68, pp. 91-100

  2. Effects of microplasma arc AISI 316L welds on the corrosion behaviour of pipelines in LiBr cooling systems

    Corrosion Science, Vol. 73, pp. 365-374

  3. Susceptibility to galvanic corrosion of base AISI 316L/welded AISI 316L thermocouples in LiBr solution

    EUROCORR 2013 - European Corrosion Congress

2012

  1. Effect of temperature and impurities on the AISI 316L/microplasma arc welded AISI 316L galvanic pair in H3PO4 under flowing conditions

    ECS Transactions

  2. Effects of flow variations on the galvanic corrosion of the copper/AISI 304 stainless steel pair in lithium bromide using a zero-resistance ammeter

    International Journal of Electrochemical Science, Vol. 7, Núm. 1, pp. 747-759

  3. Erratum: Influence of temperature and Reynolds number on the Galvanic corrosion of the copper/AISI 304 stainless steel pair in lithium bromide using a zero-resistance ammeter (Corrosion (2012) 68:5 (411-420)DOI:10.5006/0010-9312- 68.5.411)

    Corrosion

  4. Influence of temperature and hydrodynamic conditions on the corrosion behavior of AISI 316L stainless steel in pure and polluted H 3PO 4: Application of the response surface methodology

    Materials Chemistry and Physics, Vol. 133, Núm. 1, pp. 289-298

  5. Influence of temperature and reynolds number on the galvanic corrosion of the copper/AISI 304 stainless steel pair in lithium bromide using a zero-resistance ammeter

    Corrosion, Vol. 68, Núm. 5, pp. 411-420

  6. Integrating sustainable development in chemical engineering education: The application of an environmental management system

    Chemistry Education Research and Practice, Vol. 13, Núm. 2, pp. 128-134

  7. Thermogalvanic corrosion and galvanic effects of copper and AISI 316L stainless steel pairs in heavy LiBr brines under hydrodynamic conditions

    Corrosion Science, Vol. 60, pp. 118-128

2011

  1. Corrosion behaviour of micro-plasma arc welded stainless steels in H3PO4 under flowing conditions at different temperatures

    Corrosion Science, Vol. 53, Núm. 4, pp. 1237-1246

  2. Effect of the micro-plasma arc welding technique on the microstructure and pitting corrosion of AISI 316L stainless steels in heavy LiBr brines

    Corrosion Science, Vol. 53, Núm. 8, pp. 2598-2610

  3. Galvanic corrosion of the base AISI 316l/micro-plasma arc welded AISI 316l in polluted phosphoric acid media at different temperatures

    International Journal of Electrochemical Science, Vol. 6, Núm. 11, pp. 5550-5564