Optimization of yard operations in container terminals from an energy efficiency approach

Laburpena

This Thesis addresses common operational issues related to maritime container terminals. In the last decades, containerization of maritime transportation has grown very rapidly, forcing terminal operators to cope with unprecedented volumes of containers in a continuous manner. As a consequence, terminal efficiency is always a critical factor. In the near future, operators are also expected to face increasing operational costs deriving firstly from the energy crisis and secondly from new regulations enforcing ports to become more environmentally friendly. As a consequence, operational inefficiencies deriving from periods of congestion require innovative solutions and optimization techniques to improve the efficiency and productivity in the terminal yard. This Thesis addresses such problems by introducing an electric energy consumption model that characterizes energy expenditure of yard cranes. For each gantry, trolley and hoist movement of the cranes, the model takes into account the different resistances that must be overcome during the acceleration, constant speed and deceleration phases of each movement. The energy consumption model is coupled to two different discrete event simulation models of one parallel and one perpendicular container terminals, with the goal to analyze the handling operations and optimize energy efficiency and productivity. One additional innovative aspect of the works is that they include the effect of the volume of container traffic in the analysis with the aim to assess differences in the performance of the algorithms under a range of realistic scenarios, which is usually neglected in similar studies. Finally, in addition to stacking and retrieval operations, the works also introduce housekeeping operation, which are common in the real world but often disregarded in the literature. Such operations are relevant as they may be critical in terms of achieving good productivity, but on the other hand they amount for a significant portion of the overall energy consumption. In particular, the works of the Thesis deal have four particular objectives: (1) providing such flexible and customizable numerical models of discrete event type to simulate and analyze parallel and perpendicular terminals, (2) proposing a new stacking algorithm to reduce energy expenditure and improve automatic stacking crane productivity in perpendicular terminals; (3) optimizing the dimensions of a perpendicular layout; and (4) analyzing the distribution of containers in the yard layout as a function of the moment at which space for export containers is reserved while looking at the operational costs. In the first place, results show the models are capable of characterizing in detail the energy consumption associated to crane movements in both parallel and perpendicular terminals. With respect to perpendicular terminals, the proposed stacking algorithm is capable of improving the energy efficiency up to around 20% while achieving greater productivity at the same time. In addition, results show that the dimensions of a perpendicular terminal block can be optimized so as to improve the productivity; with respect to energy consumption, although a smaller block induces lesser electrical consumption, the random nature of housekeeping operations produce a significant degree of distortion in the results, revealing that such operations constitute a promising flied for future research. Finally, considering parallel terminals, a greater degree of clustering is observed as the reservation is made earlier. When considering the associated operational costs associated to yard cranes and yard trucks, greater clustering results in more efficient use of the energy, and therefore reservation may be desirable when possible to enhance terminal productivity.